Standards, Guideline Documents and Techniques for
Inspection with Usage of MMM method
ISO-24497-1:2007 Non-destructive testing - Metal magnetic memory - Part 1: Vocabulary.
ISO-24497-2:2007 Non-destructive testing - Metal magnetic memory - Part 2: General requirements.
ISO-24497-3:2007 Non-destructive testing - Metal magnetic memory - Part 3: Inspection of welded joints.
Standards:
GOST R 52005-2003. Non-destructive testing. Metal magnetic memory method. General requirements. ... >>>
GOST R 52081-2003. Non-destructive testing. Metal magnetic memory method. Terms and definitions. ... >>>
GOST R 52330-2005. Non-destructive testing. Stressed-strained state test on industrial objects and transport. General requirements. ... >>>
ST RWS 004-03. Non-destructive testing. Welded joints of equipment and constructions. Method of metal magnetic memory. ... >>>
Guideline Documents:
GD 10-577-03. Standard instruction for metal control and lifetime prolongation of boilers, turbines and pipelines main units at thermal power stations.
GD 34.17.446-97. Methodical guideline for engineering diagnostics of heating surface tubes of steam and hot-water boilers.
GD 34.17.437-95. Methodical guideline for engineering diagnostics of welded joints on pipelines and vessels.
GD 51-1-98. The technique for on-line computer diagnostics of local gas pipeline segments using the metal magnetic memory.
GD 03-380-00. The instruction for inspection of ball vessels and gasholders for pressurized liquefied gases storage.
GD 03-410-01. The instruction for complex engineering examination of isothermal vessels for liquefied gases.
GD 12-411-01. The instruction for diagnostics of gas pipelines underground networks.
GD 102-008-2002. The instruction for diagnostics of pipelines technical condition by non-contact method.
GD 08.00-29.13.00-KTN-012-1-05. The regulations for procedure of engineering examination and lifetime prolongation of oil pipelines fitting.
GD 16.01-60.00-KTN-085-1-05. The technique for diagnostics and certification of the ODS technological oil pipelines.
MR-10-72-04. Methodical recommendations for technical state inspection and residual lifetime assessment for the purpose of prolongation of elevators safe operation time.
Methodical guidelines and techniques:
Methodical guidelines for engineering diagnostics of pipelines.
Methodical guidelines for engineering diagnostics of vessels and apparatuses.
The technique for assessment of steam boiler drums state.
The technique for assessment of steam turbine rotors state.
The technique for assessment of steam turbine blades state.
The technique for control of turbine rotors flushing holes.
The technique for assessment of individual parts state in turbine equipment (studs, bearing inserts, etc.).
The technique for assessment of turbine bodies, cylinders, lock and control valves state.
The technique for assessment of generator sleeve tubes state.
The technique for assessment of compressor system blades and rotors state.
The technique for assessment of boiler and steampipe bends state.
The technique for control of babbit abutment density on sliding bearing inserts.
The technique for detecting mechanical stress concentration zones in gear wheels.
Methodical guidelines for magnetic inspection of elevators metallic structures.
The technique for control of crane pivots, buckets, hooks and hook hangers.
Methodical guidelines for magnetic inspection (MMM method) of metallic structures of lifting machines.
Methodical guidelines for engineering diagnostics of compressor-boring pipes and couplings.
Methodical guidelines for in-pipe diagnostics of heat-exchangers.
The technique for control of production trees at oil and gas fields.
Methodical guidelines for engineering diagnostics of electrical rotary pump systems (ERPS) end parts.
Methodical guidelines for noncontact magnetometric inspection of gas and oil pipelines using TSC-3M.
Methodical guidelines for inspection of large-diameter pipelines (? 530-1420mm) using specialized scanning devices and the MMM method.
Methodical guidelines for inspection of rolling-mill working and back-up rolls.
Methodical guidelines for ?2,0 and ?2,6 steel wire inspection.
Methodical guidelines for inspection of locomotive power components (frog, shaft, spline joints).
The technique for control of stress distribution in tightened bolted joints.
Methodical guidelines for engineering diagnostics of high-voltage line derrick guys fastening units.
The technique for detection of mechanical stress concentration zones in products and equipment.
|
